as per your check III
the connect to DB failed for user system.
ERROR => Connect to database failed, rc=1, rcSQL=-10709
please check the test connection in dbacockpit and if connection fails with same error then password may need to be updated.
↧
Re: Connection failed (RTE:[89006] System call 'send' failed,rc=32:Broken pipe)
↧
Re: Connection failed (RTE:[89006] System call 'send' failed,rc=32:Broken pipe)
Hello,
Thanks a lot for your reply.
The error in DB13 is the same:
SQL Message: Connection failed (RTE:[89006] System call 'send' failed, rc=32:Broken pipe)
The user that runs the Job, is an ABAP Dialog User. It is not blocked, in fact we are working with it to perform BC tasks. Also not roles or chages are registered for this user since november. The current error started 2 days ago.
Best Regards,
Erick Ilarraza
↧
↧
Virtual Distributed Switches on vSphere 5.5 for HANA
Hi all,
I wanted to ask you a question about VDS (Virtual Distributed Switches) functionality on VMware vSphere for HANA.
Which are the impact to keep this option disabled in a virtual DEV/QAS SAP HANA environment hosted on VMware vSphere 5.5?
Because of there are different official guidelines documents that suggest to enable such functionality as best practice, are there some official references that allow you to keep it disabled without significant impacts?
Thank you in advance.
BR
Angelo
↧
Hana sp11 installation and upgrade on linux RH
I have tried to install HANA sp11 as fresh install and also tried to upgrade my existing sp10 database. Both upgrade and new installation failing.
New installation failure:
nstalling package 'EPM'...
Installing package 'Documentation'...
Installing package 'Delivery Units'...
Installing package 'DAT Languages'...
Installing package 'DAT Configfiles'...
Creating instance...
hdbparam: Working configuration directory: "/vicky1/hana11/SB4/global/hdb/custom/config"
hdbnsutil: creating persistence ...
hdbnsutil: writing initial topology...
hdbnsutil: writing initial license: status check = 2
Installation failed
unhandled exception: Can't load '/vicky1/download/sp11/SAP_HANA_DATABASE/instruntime/SSLeay.so' for module Net::SSLeay: libcrypto.so.0.9.8: cannot open shared object file: No such file or directory at DynaLoader.pm line 193.
at sdbrun/Require.pl line 62.
BEGIN failed--compilation aborted at IO/Socket/SSL.pm line 19.
Can't locate Net/SSL.pm in /vicky1/download/sp11/SAP_HANA_DATABASE/instruntime/SDBINST.TGZ /vicky1/download/sp11/SAP_HANA_DATABASE/instruntime (/vicky1/download/sp11/SAP_HANA_DATABASE/instruntime/SDBINST.TGZ /vicky1/download/sp11/SAP_HANA_DATABASE/instruntime contains: /vicky1/download/sp11/SAP_HANA_DATABASE/instruntime/SDBINST.TGZ, /vicky1/download/sp11/SAP_HANA_DATABASE/instruntime) at Net/HTTPS.pm line 30
0: SDB::Install::App::__ANON__ in source SDB/Install/System.pm line 4012
1: SDB::Install::System::loadSSLRequiringPackage in source SDB/Install/SAPControl.pm line 207
2: SDB::Install::SAPControl::init in source SDB/Install/SAPControl.pm line 76
3: SDB::Install::SAPControl::new in source SDB/Install/SAPInstance/TrexInstance.pm line 4252
4: SDB::Install::SAPInstance::TrexInstance::cleanupLocalLeftovers in source SDB/Install/SAPInstance/TrexInstance.pm line 4456
5: SDB::Install::SAPInstance::TrexInstance::startLocalSapStartSrvUx in source SDB/Install/SAPSystem.pm line 1500
6: SDB::Install::SAPSystem::createInstance in source SDB/Install/App/Installation.pm line 848
7: SDB::Install::App::Installation::install in source SDB/Install/App/Console/Installation.pm line 623
8: (eval) in source SDB/Install/App/Console/Installation.pm line 611
9: SDB::Install::App::Console::Installation::main in source SDBRun.pl line 396
10: (eval) in source SDBRun.pl line 395
11: SAPDB::Install::Start::StartRequireInc in source SDBRun.pl line 263
12: SAPDB::Install::Start::Start in source -e line 0
Log file written to '/var/tmp/hdb_SB4_install_2016-01-08_13.56.06/hdbinst.log' on host 'JYOL00547447A'.
[root@JYOL00547447A SAP_HANA_DATABASE]#
and upgrade failure:
[1/8/2016 1:26 PM] Bagai, Saroj:
Checking upgrade...
Upgrade failed
unhandled exception: Can't load '/vicky1/download/sp11/SAP_HANA_DATABASE/instruntime/SSLeay.so' for module Net::SSLeay: libcrypto.so.0.9.8: cannot open shared object file: No such file or directory at DynaLoader.pm line 193, <__ANONIO__> line 417.
at sdbrun/Require.pl line 62.
↧
Is there a way to catch failed login information?
Hi, I am a new in HANA. recently one user account was locked for many times. Is there a way to catch when and which application the user try to use in the HANA database? Many thanks.
↧
↧
Re: Migration path or SAP Hana
Dear Sir,
This is a quite difficult question for a forum, since you need to evaluate several factors that depend on your system landscape. Basically, the core issue is that your ERP is the central point of your business, so upgrading your ERP to HANA, which mean going to ERP EHP 7 may have an side-effect on your satellite systems like PI, CRM, BI.
So, integration / side effects are the main issue here. You really need to understand how this update will affect the other satellites system, maybe you will need to update one satellite system before your ERP, else you need to update your ERP and another satellite system at one step.
On the other hand, going to the cloud need a deep review of all your SSO / Network connections, since changes in host id will affect all your PSE definitions, certificates, SSO scenarios, not to mention the non SAP Legacy systems that integrate to your satellite SAP systems.
Quoting Creighton Abrams, "When eating an elephant take one bite at a time." 
Best Regards,
Erick Ilarraza
↧
Re: Is there a way to catch failed login information?
Hello,
Please go to the "Auditing Activity in SAP HANA Systems" from your SAP HANA Administration Guide (for HANA SP).
More info:
SAP HANA Audit Trail - Best Practice
Best Regards,
Erick Ilarraza
↧
Re: Virtual Distributed Switches on vSphere 5.5 for HANA
Dear Sir,
Please refer to the following:
https://www.vmware.com/files/pdf/SAP_HANA_on_vmware_vSphere_best_practices_guide.pdf
"Virtual Distributed Switch (vDS) SAP HANA uses Virtual Distributed Switches. Prior to vSphere 4.0, virtual infrastructure administrators configured standard switches on each host. vDS enables virtual machine networking that spans multiple vSphere hosts to be managed as a single virtual switch from a centralized VMware vCenter Server through vSphere Client.
When a vSphere host is added, the networking for that host does not require configuration. Instead, the host is added to a defined port group that is dedicated to SAP HANA traffic or other application-specific traffic. In addition to supporting Private VLANs (PVLANs), vDS can also be used to shape both inbound and outbound network traffic. VMware Standard Switches can be easily migrated to vDS in a non-disruptive manner with the vCenter Server management user interface."
Even if you don't go to scale up yor Dev / QA HANA system (at least not now), What is forcing you to turn off this new feature?
Best Regards,
Erick Ilarraza
↧
How to execute the HANA_Configuration_MiniChecks_Rev100+ script
Hi,
I downloaded the script HANA_Configuration_MiniChecks_Rev100+.txt from the OSS note 1969700. Can somebody tell me how to execute that script in a HANA database? And what modifications we need to do in the script before running it?
Thanks,
Arindam
↧
↧
HANA views generation on BW Infocubes
Hello
Im trying to generate HANA Views on BW infocubes using 'Generate HANA Views' option in the infocubes. I was able to generate the view on infocube and I could preview the data in Studio. When I;m trying to access the HANA view in reporting tools, Authorization issue has been raised.
I went ahead and checked consistency of the HANA view using RS2HANA_CHECK tcode. I'm getting below error messages.
error 1:
--------------
InfoProvider &&&&: Filter string does not exist
Message no. RS2HANA_CHECK014
Diagnosis
No entry exists in table RS2HANA_AUTH_STR for the mentioned InfoProvider
and BW user. When accessing the generated SAP HANA View the database
user is not authorized.
Procedure
Make sure no other errors are displayed, otherwise correct the errors.
Then trigger the SAP HANA Model Authorization Replication again by
either activating the mentioned InfoProvider or running report
RS2HANA_AUTH_RUN.
error 2:
------------
User SAP<SID>: Select on View failed
Message no. RS2HANA_CHECK055
Diagnosis
Running an example SELECT statement on the specified SAP HANA View
failed for the mentioned user and specified database connection.
If check "Existence and Assignment of SAP HANA Privilege(s)" is enabled,
warning message RS2HANA_CHECK077 "Privilege on OLAP view is missing"
should be displayed, too. If so, follow the instructions mentioned in
the long text of message RS2HANA_CHECK077.
Procedure
Make sure all prerequisites are met in order for the BW user to be able
to access the generated SAP HANA View. In addition make sure no errors
are displayed for the mentioned user, otherwise correct the issues and
try again.
Also make sure that you selected to check "Existence and Assigment of
SAP HANA Privilege(s)" and look for warning message RS2HANA_CHECK077
"Privilege on OLAP view is missing".
--------------
I checked table RS2HANA_AUTH_RUN and I could see a record for my user id generated.
We didnt get any RS2HANA_CHECK077 "Privilege on OLAP view is missing" message.
Any help is appreciated.
Thanks,
John.
↧
Re: How to execute the HANA_Configuration_MiniChecks_Rev100+ script
Hi Arindam,
The version of the script mentioned above is compatible with all HANA systems higher than SPS10
Just copy the script from the .txt file open a new SQL CONSOLE for the desired HANA system and paste the contents
Execute the script and you should see the results in a few seconds(may take couple of minutes as well)
Hope it helps
Sunil
↧
Re: Virtual Distributed Switches on vSphere 5.5 for HANA
Hi Erick,
thank you for your reply. I've already read such best practices documentation but a license limitation forces me to keep this featured turned off. So, before to plan a license upgrade, I would like to know which impact I can face if I keep standard switches instead of virtual distributed ones.
Thanks again.
BR
Angelo
↧
Re: Hana Column views clarification
Thanks to Deepak and Shiromani, Its clear now.
↧
↧
HOW TO USE UNION WITH CONSTANT VALUES IN SCRIPTED VIEW
Hi All,
I am doing a work out on Union operator. When using Union in calculation view by default it will work as union with constant values. but same is not possible in Scripted view.
For Eg: Table1
Table2
Below is the output of calculation view which i used union node:
Output:
Same output i get using below query in scripted view
SELECT REGION_ID,PRODUCT_ID,SUM(SALES_AMOUNT),SUM(DISCOUNT) FROM(
SELECT REGION_ID,PRODUCT_ID,SALES_AMOUNT,0 AS DISCOUNT FROM "NEO_B45RWNY007IMPIDRM4ZSG1OV0"."SALES"
UNION ALL
SELECT * from "NEO_B45RWNY007IMPIDRM4ZSG1OV0"."SALES1") GROUP BY REGION_ID,PRODUCT_ID;
Is there any other syntax like union with constant values in sql hana
Thanks,
Rithika
↧
Re: HOW TO USE UNION WITH CONSTANT VALUES IN SCRIPTED VIEW
Hi Rithika
Below Script works for me . Here I used CE function to achieve the same.
As long as in your data set characteristics are same in both the tables, it should work for you also
Last statement can also be changed to use CE function only.
var_out = CE_UNION_ALL(:P11 ,:P22 ) ;
Cheers
Anindya
↧
Re: HOW TO USE UNION WITH CONSTANT VALUES IN SCRIPTED VIEW
If you want to use only SQL statements i.e No CE Function
, below one works for me.
SALES1:
SALES2:
Result in all 3 models ( graphical CV, Scripted CV with CE_FUNCTION, Scripted CV with SQL )
Cheers
Anindya
↧
Re: HANA views generation on BW Infocubes
Any inputs appreciated.
↧
↧
HANA DB Recovery issue - convert topology failed
May I please request for help on the below issue. I am unable to Recover my DB using a backup without catalog.
RECOVER DATA finished with error:
recovery could not be completed,
Recovery failed in nameserver startup: convert topology failed: found multiple instance numbers in topology
Could not start master name server
Recover Trace File -
hana1 is master
creating file recoverInstance.sql
restart database
restart master nameserver: 2016-01-10 06:11:34
start system: hana1
start system: hana1 failed: start of nameserver failed
recoverSys failed: 2016-01-10 06:11:45
2016-01-10T06:11:44+00:00 P032456 1522a29661c INFO RECOVERY state of service: nameserver, hana1:35
001, volume: 1, RecoveryExecuteTopologyAndSSFSRecoveryFinished
2016-01-10T06:11:44+00:00 P032456 1522a29661c ERROR RECOVERY RECOVER DATA finished with error: [448
] recovery could not be completed, [110092] Recovery failed in nameserver startup: convert topology failed:
found multiple instance numbers in topology
2016-01-10T06:11:44+00:00 P032456 1522a29661c ERROR RECOVERY RECOVER DATA finished with error: [448
] recovery could not be completed, [110092] Recovery failed in nameserver startup: convert topology failed:
found multiple instance numbers in topology
Regards,
Rupali S
↧
Re: Hana sp11 installation and upgrade on linux RH
This is because there are some missing libraries in your system.
1) Install required libraries as per the document attached to the SAP Note: 2009879
2) Follow some extra configuration steps as in SAP Note: 2136965
Please close this thread if this answers your question. thanks
Saddy Bhat
↧
Re: Replicate Data from SAP HANA to IBM NETEZZA
Depends,
One time replication or more?
Realtime or batch mode?
↧